Therese a Lot Of Myths Out There About Remanufactured Cartridges. The Following Sets The Record Straight


MYTHS AND FACTS [FAQ’S]

Myth 1: Using a remanufactured cartridge will void my warranty or damage my printer.

Fact 1: It is very unlikely that a problem with your printer equipment would stem from the cartridge. If that should occur and can be determined to be caused by a cartridge that is not the manufactures, The Company may decline that particular repair. Remanufacturing companies are so certain that the cartridge will not cause damage hence they will frequently offer to repair any problems caused directly by their cartridge free of charge. Many remanufactures also offer repair service for all types of equipment problems. The service backup provided by remanufactures is generally more personalized than an OEM. Local recharges often have one of their service techs stop by and replace a cartridge on his/her route. Larger remanufactures, Even the ones with distributors, Tend to focus only on remanufactured cartridges, So if you call them you are likely to speak with somebody who can actually help you.


MYTHS AND FACTS [FAQ’S]

Myth 2: A cartridge that is not made by the printer manufacturer will provide lower

quality oriented images.

Fact 2: As with any product, varies quality levels can and do exist. But that does not mean only the printer remanufactures cartridges can provide the quality you require. Many remanufactured products conform to high quality standards and provide quality that matches or exceeds consumer’s expectations. You owe it to yourself to check out the remanufactured cartridges can provide for your business.


MYTHS AND FACTS [FAQ’S]

Myth 3: Chips are used in cartridges to add better information and services.

Fact 3: Chips can provide information, but they come at a Price. The use of a chip technology adds to the cost of the cartridge. They can also make it harder to remanufacture a cartridge. It stands to reason that chips that lock out competition also lock out your choice as a consumer.



MYTHS AND FACTS [FAQ’S]

Myth 4: Purchasing cartridges can be so confusing that it is easier to just buy the printer

brand name.

Fact 4: It’s a bottom line, money and common sense issue. Would you buy a car if you were only able to fill it with the carmakers own brand of gasoline? With the average office spending thousands per year on imaging supplies, isn’t it worth it to find out for you the savings and benefits that can be achieved with remanufactured cartridges? Also, many remanufacturing companies are more eager to please, have better service, and are willing to help you determine the proper type and style of cartridge for your printers.



MYTHS AND FACTS [FAQ’S]

Myth 5: The savings of using remanufactured cartridges do not justify developing a relationship with a remanufacture.

Fact 5: An office of 20 with two printers spends can spend Rs. 60,000/- per year on printer cartridges and remanufactured cartridges can save that office as much as Rs.40,000/-per year in cost. And you’ll enjoy the personal attention and customer service that relationship generates!



Frequently Asked Questions ( FAQ ) Solutions To Common Problems

Q: I have inserted a Re-filled cartridge and the printer does not accept it:

A: Have you removed the plastic cover from the face of the cartridge and the blue / black tape from the bottom of the cartridge before you installed it.

Please remove the cartridge, and then re-insert it. If the printer still does not accept the cartridge the close the cover on the printer, and turn it off. Then reboot your pc, and then turn the printer on, and install the same cartridge again. If this does not resolve the problem, then install a new cartridge.

Q: The re-filled cartridge works, but the results are poor:

A: All HP cartridges must be stored upright in their box whilst in storage before use. If the cartridge has not been stored in this upright position, then the print quality will be poor until the ink settles to the bottom of the cartridge where the print head is. Simply leave the cartridge installed in the printer for 2-6 hours, and quality will be restored. Make sure any spare cartridges are stored upright, so they work correctly when first installed. An air pocket may be stopping the ink from leaving the cartridge. Simply remove the cartridge, take a folded sheet of kitchen towel, and rap around the cartridge, and shake the cartridge several times. Then blot the cartridges print head on the towel until a color or black pattern is seen, now the ink is leaving the cartridge, the cartridge can be inserted into the printer.

Q: Can HP ink cartridges be recycled:


A: Yes, Please return your empty cartridges in the plastic envelope provided with your


new cartridge.

Q: Do re-filled ink jet / laser jet match the quality of HPs own brand inks:


A: Now that BLACK JET only use Page bright premium inks, supplied to us directly, we


are confident that our products will match the original manufacturers in ever way except


price.


 
Make a Free Website with Yola.